Night Vision Monoculars NVMT 1 (2x24)
Sku # 24021
  The NVMT 1 (2x24) is the top of the NVMT line. Its magnification and wide field of view makes it an excellent scope for general observation. This affordable, compact, lightweight monocular provides comfortable viewing and versatility for numerous activities. It's perfect for the outdoor enthusiast to take from a sporting event to a hunt. The Yukon's exclusive PULSE™ system Infrared (IR) Illuminator provides infrared lighting for an enhanced image, while staying invisible to the human eye and animal's eyes. The PULSE™ system utilizes quick IR energy bursts that penetrate further to increase distance, visibility and image quality, without significant battery drainage or untimely IR burnout. The NVMT's 2x magnification and wide field of view makes it an excellent choice for general observation and home security.

  Night Vision Monoculars NV MT-1 specifications

OVERVIEW

Your NVMT starlight night vision scope is a professional specification night vision device designed to provide enhanced viewing in all low light conditions including total darkness.

The NVMT is a passive starlight device; it does NOT require any artificial light source, although an artificial infrared light will greatly enhance the scope's effectiveness in all facets of operation. NVMT is constructed using an electro-optical intensifying tube contained in a water-resistant composite housing. The entire unit is rugged enough for extreme field conditions but damage may occur if the scope is mishandled.

The NVMT is entirely self-contained and can operate for up to 20 hours (40 hours for NVMT Gen. 2+) on CR123A battery at temperatures ranging from -22°F to +104°F (-30°C to +40°C).

Your NVMT scope is ideal for a variety of professional and recreational uses including the following:

• Wild life observation
• Astronomy
• Boating
• Search and rescue
• And many other activities...

WARNINGS AND PRECAUTIONS

Your NVMT night vision scope was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your NVMT always obey the following Warnings and Precautions:

• Do not point the NVMT towards any light source greater than 1 lux (such as car headlights) for an extended period of time. Our NVMT utilizes an internal flash protection system, which minimizes potential damage, but long-term exposure to bright lights can damage the unit. Any such damage may void your warranty.
• Your NVMT was designed to be self-contained. Do not open the body of the scope or otherwise attempt to service this device.
• The replacement of eyepiece and objective lenses in the 24021WP and 24022WP models is prohibited: this may cause depressurization of the device.
• Always store the NVMT in a dry, well-ventilated room. Keep the NVMT away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.
• Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, the NVMT incorporates a sophisticated optical system which could be damaged in extreme cases of misuse.
• Clean optical parts (lenses) with professional lens cleaning supplies designed for use with multicoated optics.
• Clean the exterior of your NVMT with a soft, clean cloth.

Damage to this device from failure to observe these warnings may void the NVMT's warranty!

BATTERY INSTALLATION

Your NVMT runs on one battery - CR123A. To install, unscrew the battery compartment cover, insert the battery into the battery compartment so that the positive (+) and negative (-) terminals of the battery match the markings inside the compartment, replace the battery cover carefully. Do not overtighten.

USE AND TESTING

Your NVMT operates using one battery - CR123A. Make sure it has been installed according to instructions found in the battery installation section of this manual.

• If you wish to test your night vision device in a lighted area, be sure the lens cap is in place prior to pressing the “ON” button. The lens cap has a pinhole opening to admit a small amount of light for testing purposes.
• Move into a dark area before activating the NVMT light amplifier.
• Remove the lens cap (1) and fasten it to the body as shown in the picture.
• Activate the device by pushing the "ON" button (3).
• If the subject to be viewed is in a completely dark area, including lowlight shadow areas, activate the infrared illuminator by pressing the “IR” Button (2) located next to "ON" button.
• Direct your NVMT device at an object at a distance approximately 100 yds. Adjust the eyepiece and objective lens diopter setting to focus the unit by rotating the eyepiece (4) and objective lens (5).
• After the adjustment, do not rotate the eyepiece irrespective of the distance and other conditions.
• Direct your NVMT device at the subject to be viewed and adjust the final focus by rotating the objective lens (5) focusing ring until the image quality is optimal.
• The green LED indicates that the light amplifier unit is on. The red LED indicates that the IR illuminator is on.
• Do not store your NVMT when any of the indicators are lit. When you finish using your NVMT device, turn off the entire unit including the IR illuminator and light amplifier. Return the lens cap to the objective lens.