Thermal imaging infrared camera Features Include:

• Auto Focus

• Image control adjustment:: electronic magnification, image enhancement., brightness, contrast, gain etc.

• Dry Nitrogen Backfilled.

• Environmentally Sealed

• Remote Control Capability

• 14.1° and 4.7° Fields of View

• Dual Field of View (50/150mm)

• Uncooled 7-14μm VOx Microbolometer 30hz 320x240 detector

• Detection a man-size target: ≥1800m @ 4 vertical FPA pixels. detection boat beond 10km.

• Option: Ethernet TCP/IP, digital compass and GPS data show on monitor by serial port.

Pan/Tilt details:

Field of Regard (FOR): 360° Continuous Pan; +/-45° Tilt

Pan speed: 0.1°/s~55°/s; Tilt speed: 0.1°/s~30°/s

Accuracy: 0.1° Pay load: no less than 15kg

Pan acceleration: ≤55°/s² Tilt acceleration: ≤20°/s²

Pre-setting points: 255 Maximum

Cruising function: 6 cruising paths, each cruising path up to 20 points.

Scanning function: 1 strip path

Control Function: OSD menu, Off power can be self-locking, lens focal adjustment. etc

Protocol: Option Pelco-D/ Pelco-P.

Baud rate: Option 2400/4800/9600/19200 bps

Command and control:RS232 or RS485

Power supply: AC24V±20%,50/60Hz, DC28V±20%, Option 12V DC.

Power consumption: ≤40w

MTBF: ≥5000h; MTTR: ≤30min

when pan/tilt payload 10kg , ordinary turn work at vehicle or boat speed 60km/hours

Relative humidity, 93%

Salt-fog Spray: continuously spray fog for 48 hours under PH6.5-7.2

Wind-proof: 20.7m/s.

Protection level: IP66.

Operating temperature: -25°C to +55°C, Option -40°C to +60°C

Storage temperature: -40°C to +65°C

Size: 265mm x180mm x315mm

Weight: 11.5kg